Kauçuk – Orjinal Mühendislik

Rubber

It is applied for thermal insulation and condensation control on the outer surfaces of ducts and large diameter pipelines in heating, cooling, ventilation and air conditioning systems.
It is recommended to use Al-foil coated products in volumes where radiant heat transfer is possible
Using the special adhesive recommended by İzocam, the boards are adhered to the duct surface to be applied.
Joints should be glued to ensure tightness, and if necessary, sealed with insulation tape after gluing.
Taping should not be so tight as to cause loss of thickness. Self-adhesive boards do not require the use of additional adhesive.
The application must be protected against punctures and tears. For applications exposed to sunlight, a protective jacket or protective paint must be used against UV effects.
Using the special adhesive recommended by İzocam, the boards are adhered to the duct surface to be applied.
Al-foil coated products can be used in sunlit indoor environments without the need for a separate coating against the UV effect.
Outdoor applications should be covered within 5 days.

We accept quality as a standard, we commit to customer satisfaction in every project.